The Maintenance Of Spice Grinder(grinding mill)
Lack of oil pressure, or plug the chute, chute wear a serious need to spend shovel handle.
Oil-enough air in the fuel tank, not discharged, the rod will have a strong hold in crawling
The old spice grinder(grinding mill), crawling phenomenon was mainly due to the friction generated when there is a static and dynamic friction coefficient of poor transmission of the lack of rigidity and movement of pieces of large inertia and other factors, as the use of excessively long hours, increasing friction from top to bottom table, lead Rail wear as well as the serious lack of lubrication, the solution to the shovel blade guide to spend as much as possible some of the deep, in order to increase oil storage capacity, update the network Transmission filter, clean and replace the rail so that the lubricating oil flowing!
The new spice grinder of the more common causes of the leak, check the hydraulic pipes and pieces of interface whether there is oil, lubricating pressure is below the required standards.
The following is a summary of the points I have the experience
1:the bed of spice grinder, table or rail wear uneven distribution scratch ideas, too little contact points. Check bed, table and point of contact with the guide rail surface roughness. Ideas not hang on to repair and improve the finish is in the rail bed evenly coated with a layer of kerosene to Draw Frame # 300 of chromium oxide abrasive Under the agent placed on the table after a total length of the next move after 8-12, after lifting Wash;
2: hydraulic cylinder, piston rod on the side of the bus and rail bed parallel to the degree of tolerance, the assembly should require correction of about 5 hydraulic cylinders can be within a wire;
3: hydraulic oil is not the right choice;
4: hydraulic piston and cylinder gap is too large, with diarrhea leakage. Should be allocated for the Pistons, or with a new set of exchange;
5: valve surface wear and tear, there is leakage;
6: hydraulic system into the air, the light emission of air to check into the cause of the air; 7: HIP-table hydraulic adjustment inappropriate.
There have been discussions here from time to time about using an electric coffee grinder as a spice grinder, and how to clean it, etc. I'm going to recommend the best grinder out there for this purpose. I'm not claiming that this is the best coffee grinder, but I think it's the perfect one to use as a spice grinder.
The things that makes the blade coffee grinder superior as a spice grinder are that the canister that holds the spices/beans is a) large, b) stainless steel, and most important, c) detaches from the grinder so it can be cleaned. The canister is a unit with the blade attached inside, on a plastic base that fits onto the base of the grinder. So no more furious brushing and running rice through the grinder to sort-of remove the cumin scent, etc. You can just take the canister and its top off and wash it thoroughly in soap and water. The motor is strong and easily grinds whole spices finely.
New from Mill Powder Tech Co., Ltd, their Blade Coffee Grinder(grinding mill) is powerful, durable, stylish and convenient. It has a 200-watt motor with a stainless steel blade to grind whole beans for the freshest taste and the richest aroma. It has a heavy-duty motor housing and bowl with a hi-impact top cover. Its sleek design provides an elegant look, and comes in four smart colors. To use, simply push down on the center top cover and your beans will grind to the consistency desired. Remove the top cover and bowl and pour your ground beans into your coffee maker. Other features include a dual interlock system that locks the top cover in place before grinding, a pulse control, and etched markings to adjust the amount of grinds to your liking.
grinding mill machine for industrial.
This contents for reference only, business please go to the official network http://mill.com.tw
The Maintenance Of Spice Grinder(Grinding mill)
