24h購物| | PChome| 登入
2012-12-20 13:29:55| 人氣79| 回應0 | 上一篇 | 下一篇
推薦 0 收藏 0 轉貼0 訂閱站台

Measure for chimney corrosion problem of dryer

Measure for chimney corrosion problem of dryer

1) due to the corrosive action of the dryer machine flue gas and slag abrasive particles are strong, dryer system air leakage has been plagued by cement companies, therefore, strengthen the dryer system plugging wind not only conducive to the dryer energy yield, but also related to the stable operation of the dust removal equipment.
2) Flue gas temperature control and alarm devices sound and light alarm sound is harsh, so post operators often close it which makes the device malfunction. Therefore, in the day-to-day production management we need to frequently check alarm device to ensure the normal operation.
3) According to a survey of some of the cement plants, in some enterprises often found the dryer inspection door was not strict, which exist serious safety hazard, the cement enterprises must pay attention to safety issues dryer.
1.Dryer chimney corrosion problem
1) Dryer flue gas has strong corrosion, plus dryer dust collector outlet pipe and chimney are without thermal insulation, it is easily in the winter, the flue gas in the chimney appear condensation, and even chimney wall drip, exacerbating chimney corrosion (mainly water-soluble sulfate electrochemical corrosion).
2) In chimney making process, we generally brush secondary room temperature antirust paint; dryer flue gas temperature is at 60-150%; new chimney near anti-rust paint quickly produces bubble and fall off, the protective layer is damaged , speeding up the chimney corrosion.
2. Measures and effect
1) change round chimney into a rectangular chimney (in chimney replacement process, coiling machine fails, for safety and without affecting the production, we had to take a welding method), the four corners of the rectangle use 30mmx30mm angle iron for reinforcement, chimney pipe adopts flange connection.
2) Take rust treatment, use high temperature (400 C) anti-rust paint to brush 2 times. After the end of the on-site installation and welding, use anti-rust paint brush the welding place again.
 

ore beneficiation : http://www.ore-mills.com/
Cone crusher supplier : http://www.ore-machine.com/cone-crusher.html

台長: nicole00py
人氣(79) | 回應(0)| 推薦 (0)| 收藏 (0)| 轉寄
全站分類: 不分類

是 (若未登入"個人新聞台帳號"則看不到回覆唷!)
* 請輸入識別碼:
請輸入圖片中算式的結果(可能為0) 
(有*為必填)
TOP
詳全文