The maintenance and installation of mixing drum

We are very familiar with mixing barrels, many places and all walks of life in our country are in use, we are talking about today is mainly for the pulp stirring, mixing drum is very intelligent, unlike previous the mixing drum is special awkwardly, it mainly relies on motor V-belt drive impeller rotation to make pulp mixed with the drug evenly.
Manufacturing:
1In the manufacture of various parts and components, technical requirements should be based on the drawings.
2 after welding, the welding part must go through the detailed examination about whether the weld is good, especially the tanks of the type 6 welding landlord should pay special attention, and after completion check tightness to avoid leaking after filling with liquid. The welding slot is required to use of T424 electrode, welding rake should maintain the correct position on the drawings.
3 the pressure spring in the signaling device should go through pressure test. When the compression of the spring is deformed into a 10mm, 6 thickener undertake axial pressure of 1025 kg and 12-type concentrator by axial pressure of 2250 kg.
Installation:
1 when install transmission and deceleration components, we should pay particular attention to keep the parts machined surface clean. Contact portions of the rotary member should be cleaned by kerosene before installing and plus lubricants in installing process; during the installation process, the individual parts and components of the transmission check should be carried out. Rotation should be without noise and rotation difficulties phenomenon.
2in the total installation process, first is for each part of the installation, and then install the transmission part of the base parts and transmission parts, and finally install the remaining parts.
Late maintenance for mixing drum preliminary work:

1Mixing drum is easy to use, before fastening the pump parts of bolts, rotating shaft is flexible generation wheel, and then start running on it.
2 in the process, according to the parameters of the mixing drum, overload running is avoided to prevent accidents.
3 In the course, the most important thing is to be clear that the impeller, and the importance of the stator, the two are very easily damaged parts, so please pay special attention in the course.
4Lubrication work must be done in place, so you can reduce unnecessary trouble in mixing drum running process.

 

We provide Professional technology, excellent product quality and intimate after-sales service when you purchase Ball mill, Drum dryer, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.