I have drawn this flower about a million times. Once you get the hang of it, you can do one in about 3 minutes. Many people have wanted me
to show them how to do this, most of them can not draw.
soundcloud promotion Even if you think you can not draw, I bet you can draw this. Once you practice over and over, you can impress your friends. Things that you need: Pen or Pencil, Colored Pencils (optional), Blender or Q-Tip (if you want to be more artistic), and of course Paper.At the basic you should have Pen or Pencil, and Paper!First, start with drawing a simple small circle in the middle of the paper. This is our starting point, and the center of our flower.Now we need to draw the petals of the flower. These are easier to do if you start on the circle we started with, go out to a point, come back down to the circle.The more you practice the easier this will become. Don’t worry if the petals overlap. As you can see I have done this. Every flower will look different than the one before.Now we are going to add some more petals to the flower. If you want to draw on a smaller scale you can skip this step. Every flower can add more or less of these. Make sure that each petal is started and ends between the previous petals.Adding the leaves.Start this just like you would if you were adding the petals, only bigger. Remember to start and finish at the base. In other words, start next to a petal, skip over a petal, come back down on the next one.You can experiment with everything, bigger petals than leaves. For this tutorial, the leaves are bigger.Add some Details.Now we are going to start adding detail to our flower.We need to add the veins of the leaves. Just start somewhere near the petals, then draw a line to the end of the leaf. This will look like you split the leaf in two. Next, draw lines that come off of this center line, alternating back and forth. You should have two lines on each side of the line.Add some more leaves.Again, just like before, and with the petals, add some more leaves. Of course, if you skipped Step 3, you might want to skip this step too. At this point, add veins again, as in Step 5.Now add some more details.Start shading in the petals. This can be done with a colored pencil, shader, or just shade with pen or pencil.The color of the petals is up to you, it is your flower. Try different colors, maybe your favorite.For this tutorial, I will use red. This will be done later. You do not have to add color until you are done drawing your flower.Tails and Fox TailsWe want to add a little more detail to our flower. In order, to add the Tails, draw a line starting between two leaves, go out to open space, loop around, and lift pencil. Then, do it again, only this time, to get a good effect try to draw over the same line, only do it faster this time. You will not get an exact line over what you drew before, this is what we want. We want to lines that look like they belong to each other.Continue this around the flower, I did this six times. Yours may be different.Now for the Fox Tails, simply draw a line out from the flower anywhere you like.These are short lines, (see Picture) that just flow out.Final DetailsThis is the time when we add the final details to our flower. Draw small half circles around the Tails. These can placed wherever you want. For the Fox Tails simply, make some lines right at the end of the smaller lines. These lines will be sideways.ColorAt this final stage, we will add color. This is optional. You may want to keep your flower in black and white.If you do choose to color your flower, the colors are up to you. You can mess around with different things with this flower. Add more petals, more leaves, whatever.It is all up to you!Good Luck! Happy Drawing!You can help the HubPages community highlight top quality content by ranking this article up or down.Sign in or sign up and post using a HubPages account.8192 characters left.Post CommentNo HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your Hubs or other sites. workingHow to Draw a Flower (Easy)I have drawn this flower about a million times. Once you get the hang of it, you can do one in about 3 minutes. Many people have wanted me to show them how to do this, most of them can not draw. Even if you think you can not draw, I bet you can draw this. Once you practice over and over, you can impress your friends. Things that you need: Pen or Pencil, Colored Pencils (optional), Blender or Q-Tip (if you want to be more artistic), and of course Paper.At the basic you should have Pen or Pencil, and Paper!First, start with drawing a simple small circle in the middle of the paper. This is our starting point, and the center of our flower.Now we need to draw the petals of the flower. These are easier to do if you start on the circle we started with, go out to a point, come back down to the circle.The more you practice the easier this will become. Don’t worry if the petals overlap. As you can see I have done this. Every flower will look different than the one before.Now we are going to add some more petals to the flower. If you want to draw on a smaller scale you can skip this step. Every flower can add more or less of these. Make sure that each petal is started and ends between the previous petals.Adding the leaves.Start this just like you would if you were adding the petals, only bigger. Remember to start and finish at the base. In other words, start next to a petal, skip over a petal, come back down on the next one.You can experiment with everything, bigger petals than leaves. For this tutorial, the leaves are bigger.Add some Details.Now we are going to start adding detail to our flower.We need to add the veins of the leaves. Just start somewhere near the petals, then draw a line to the end of the leaf. This will look like you split the leaf in two. Next, draw lines that come off of this center line, alternating back and forth. You should have two lines on each side of the line.Add some more leaves.Again, just like before, and with the petals, add some more leaves. Of course, if you skipped Step 3, you might want to skip this step too. At this point, add veins again, as in Step 5.Now add some more details.Start shading in the petals. This can be done with a colored pencil, shader, or just shade with pen or pencil.The color of the petals is up to you, it is your flower. Try different colors, maybe your favorite.For this tutorial, I will use red. This will be done later. You do not have to add color until you are done drawing your flower.Tails and Fox TailsWe want to add a little more detail to our flower. In order, to add the Tails, draw a line starting between two leaves, go out to open space, loop around, and lift pencil. Then, do it again, only this time, to get a good effect try to draw over the same line, only do it faster this time. You will not get an exact line over what you drew before, this is what we want. We want to lines that look like they belong to each other.Continue this around the flower, I did this six times. Yours may be different.Now for the Fox Tails, simply draw a line out from the flower anywhere you like.These are short lines, (see Picture) that just flow out.Final DetailsThis is the time when we add the final details to our flower. Draw small half circles around the Tails. These can placed wherever you want. For the Fox Tails simply, make some lines right at the end of the smaller lines. These lines will be sideways.ColorAt this final stage, we will add color. This is optional. You may want to keep your flower in black and white.If you do choose to color your flower, the colors are up to you. You can mess around with different things with this flower. Add more petals, more leaves, whatever.It is all up to you!Good Luck! Happy Drawing!You can help the HubPages community highlight top quality content by ranking this article up or down.Sign in or sign up and post using a HubPages account.8192 characters left.Post CommentNo HTML is allowed in comments, but URLs will be hyperlinked. Comments are not for promoting your Hubs or other sites. working