wljiateng

0愛的鼓勵 0訂閱站台

Many plates are straight, what should I do if I want to bend? You can use a bending machine to bend, and many people worry about whether the plate will be broken. You don't have to worry about this. The machine is slowly bending the plate without breaking, 3d wire bending machine，and it can be flexibly adjusted according to the raw material of the plate. Let us understand how it works.

 

Synchronization system: The machine consists of a mechanical synchronization mechanism composed of torsion shafts, swing arms, joint bearings, etc., with stable and reliable performance and high synchronization accuracy. The mechanical stop is adjusted by the motor, and the numerical control system controls the value.

 

Slider part: hydraulic transmission is adopted, and the slider part is composed of a slider, an oil cylinder and a fine-tuning structure of a mechanical stopper. The left and right cylinders of the bending machine are fixed on the frame, the piston drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value.

 

Stopper mechanism: The stopper is driven by a motor, and the two screw rods are driven to move synchronously through a chain operation. The CNC system controls the size of the stopper.

 

Workbench part: Operated by the button box, the bending machine motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The reading is 0.01 mm, and the front and back positions have travel switch limits.

like：

What are the advantages of 3d wire bending machine and 2d bending machine?

Does the wire forming machine have any requirements for place environmental conditions?

Are the functions of 2D and 3D wire forming equipment the same?