【三重紅螞蟻】☆°長江°☆ MTK指令介紹!!
【三重紅螞蟻】☆°長江°☆ 工程模式:*#3646633#
┏━設備
┃ ┣━LCD—液晶顯示幕(Liquid Crystal Display )
┃ ┃ ┗━主螢幕
┃ ┃ ┣━Set Contrast—設置對比度
┃ ┃ ┣━Set Bias Ratio—設置斜比率
┃ ┃ ┣━Set Line Rate—設置行比率
┃ ┃ ┣━Set temperature—設置溫度
┃ ┃ ┣━Set Color—設置顔色
┃ ┃ ┗━Diplay Demo Pic.
┃ ┣━GPIO—通用輸入輸出口(General Purpose I/O port)
┃ ┃ ┣━List GPIO—GPIO列表
┃ ┃ ┃ ┗━GPIO#3
┃ ┃ ┣━GPIO Editor—GPIO編輯器
┃ ┃ ┗━GPO Editor—GPO編輯器
┃ ┣━PWM—脈衝寬度調製技術(Pulse Width Modulation)
┃ ┃ ┣━PWM1
┃ ┃ ┃ ┣━Level: 3—等級
┃ ┃ ┃ ┣━Frequency: 20000—頻率
┃ ┃ ┃ ┗━Duty: 60
┃ ┃ ┣━PWM2
┃ ┃ ┃ ┣━Level: 1
┃ ┃ ┃ ┣━Frequency: 200
┃ ┃ ┃ ┗━Duty: 80
┃ ┃ ┗━PWM3
┃ ┃ ┣━Level: 5
┃ ┃ ┣━Frequency: 200
┃ ┃ ┗━Duty: 100
┃ ┣━EINT—開啓中斷(Enable Interrupt)?
┃ ┃ ┣━Charger 0—充電器
┃ ┃ ┣━Cable 0—電纜
┃ ┃ ┣━SendKey 0
┃ ┃ ┗━Earphone 0—耳機
┃ ┣━ADC—類比數位轉換器(Analogue-Digital Converter)
┃ ┃ ┣━VBAT 3.79 V—電池電壓
┃ ┃ ┣━BTemp 23.86 C—電池溫度(會有小幅波動)
┃ ┃ ┣━VAUX 1.80 V—輔助電壓(會有小幅波動)
┃ ┃ ┣━Current n/a—電流
┃ ┃ ┗━VChgr 0.70 V—充電電壓(會有小幅波動)
┃ ┣━Set Default Level—設置默認級別
┃ ┃ ┣━MainLCD Contrast—主屏對比度
┃ ┃ ┃ ┣━[LEV 1] 120
┃ ┃ ┃ ┣━[LEV 2] 122
┃ ┃ ┃ ┣━[LEV 3] 124
┃ ┃ ┃ ┣━[LEV 4] 126
┃ ┃ ┃ ┣━[LEV 5] 128
┃ ┃ ┃ ┣━[LEV 6] 130
┃ ┃ ┃ ┣━[LEV 7] 132
┃ ┃ ┃ ┣━[LEV 8] 134
┃ ┃ ┃ ┣━[LEV 9] 136
┃ ┃ ┃ ┣━[LEV 10] 138
┃ ┃ ┃ ┣━[LEV 11] 140
┃ ┃ ┃ ┣━[LEV 12] 142
┃ ┃ ┃ ┣━[LEV 13] 144
┃ ┃ ┃ ┣━[LEV 14] 146
┃ ┃ ┃ ┗━[LEV 15] 148
┃ ┃ ┣━Battery—電池
┃ ┃ ┃ ┣━LEV 1:3400000
┃ ┃ ┃ ┣━LEV 2:3400000
┃ ┃ ┃ ┣━LEV 3:3640000
┃ ┃ ┃ ┣━LEV 4:3650000
┃ ┃ ┃ ┣━LEV 5:3700000
┃ ┃ ┃ ┣━LEV 6:3790000
┃ ┃ ┃ ┣━LEV 7:3890000
┃ ┃ ┃ ┣━LEV 8:9999999
┃ ┃ ┃ ┣━LEV 9:9999999
┃ ┃ ┃ ┗━LEV 10:9999999
┃ ┃ ┣━PWM 1
┃ ┃ ┃ ┣━[Freq 1] 20000
┃ ┃ ┃ ┣━[Duty 1] 20
┃ ┃ ┃ ┣━[Freq 2] 20000
┃ ┃ ┃ ┣━[Duty 2] 40
┃ ┃ ┃ ┣━[Freq 3] 20000
┃ ┃ ┃ ┣━[Duty 3] 60
┃ ┃ ┃ ┣━[Freq 4] 20000
┃ ┃ ┃ ┣━[Duty 4] 80
┃ ┃ ┃ ┣━[Freq 5] 20000
┃ ┃ ┃ ┗━[Duty 5] 100
┃ ┃ ┣━PWM 2
┃ ┃ ┃ ┣━[Freq 1] 200
┃ ┃ ┃ ┣━[Duty 1] 80
┃ ┃ ┃ ┣━[Freq 2] 200
┃ ┃ ┃ ┣━[Duty 2] 60
┃ ┃ ┃ ┣━[Freq 3] 200
┃ ┃ ┃ ┣━[Duty 3] 40
┃ ┃ ┃ ┣━[Freq 4] 200
┃ ┃ ┃ ┣━[Duty 4] 20
┃ ┃ ┃ ┣━[Freq 5] 200
┃ ┃ ┃ ┗━[Duty 5] 0
┃ ┃ ┣━PWM 3
┃ ┃ ┣━[Freq 1] 200
┃ ┃ ┣━[Duty 1] 20
┃ ┃ ┣━[Freq 2] 200
┃ ┃ ┣━[Duty 2] 40
┃ ┃ ┣━[Freq 3] 200
┃ ┃ ┣━[Duty 3] 60
┃ ┃ ┣━[Freq 4] 200
┃ ┃ ┣━[Duty 4] 80
┃ ┃ ┣━[Freq 5] 200
┃ ┃ ┗━[Duty 5] 100
┃ ┣━Set UART—設置通用非同步收發器(Universal Asynchronous
Receiver/Transmitter)
┃ ┃ ┣━UART Setting
┃ ┃ ┗━UART POWER ON/OFF
┃ ┣━Sleep Mode—睡眠模式
┃ ┃ ┣━Enable(.)—有效
┃ ┃ ┗━Disable—無效
┃ ┣━DCM Mode
┃ ┃ ┣━Disable(.)—無效
┃ ┃ ┗━Enable—有效
┃ ┣━SWDBG—軟體調試(Software Debug)
┃ ┃ ┣━OFF
┃ ┃ ┣━DSP L1 PS
┃ ┃ ┣━L1 PS
┃ ┃ ┣━MCU
┃ ┃ ┣━MCU DSP
┃ ┃ ┗━RESET(.)
┃ ┣━NAND Format—NAND格式化
┃ ┣━TV-Out—電視輸出
┃ ┃ ┣━TV-Out On/Off
┃ ┃ ┗━TV-Out Tunning
┃ ┣━FM-Radio
┃ ┃ ┣━MONO
┃ ┃ ┣━STEREO
┃ ┃ ┣━RSSI
┃ ┃ ┣━IF Count Delta
┃ ┃ ┗━RSSI INFO.
┃ ┗━RTC XOSC (WO)
┣━音頻
┃ ┣━設置模式
┃ ┃ ┣━正常
┃ ┃ ┣━LoudSp Mode—擴音模式
┃ ┃ ┗━Headset Mode—耳機模式
┃ ┣━正常
┃ ┃ ┣━有限脈衝回應
┃ ┃ ┃ ┣━有限脈衝回應0(.)
┃ ┃ ┃ ┣━有限脈衝回應1
┃ ┃ ┃ ┣━有限脈衝回應2
┃ ┃ ┃ ┣━有限脈衝回應3
┃ ┃ ┃ ┣━有限脈衝回應4
┃ ┃ ┃ ┗━有限脈衝回應5
┃ ┃ ┣━Speech—聽筒音量
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (16)
┃ ┃ ┃ ┣━音量2 (48)
┃ ┃ ┃ ┣━音量3 (96)
┃ ┃ ┃ ┣━音量4 (144)
┃ ┃ ┃ ┣━音量5 (176)
┃ ┃ ┃ ┣━音量6 (188)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Key Tone—按鍵音
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (48)
┃ ┃ ┃ ┣━音量2 (96)
┃ ┃ ┃ ┣━音量3 (112)
┃ ┃ ┃ ┣━音量4 (128)
┃ ┃ ┃ ┣━音量5 (172)
┃ ┃ ┃ ┣━音量6 (188)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Melody—音調
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (62)
┃ ┃ ┃ ┣━音量2 (92)
┃ ┃ ┃ ┣━音量3 (112)
┃ ┃ ┃ ┣━音量4 (132)
┃ ┃ ┃ ┣━音量5 (152)
┃ ┃ ┃ ┣━音量6 (172)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━FM Radio—收音機
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (80)
┃ ┃ ┃ ┣━音量2 (120)
┃ ┃ ┃ ┣━音量3 (140)
┃ ┃ ┃ ┣━音量4 (160)
┃ ┃ ┃ ┣━音量5 (184)
┃ ┃ ┃ ┣━音量6 (200)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Microphone—麥克風
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (160)
┃ ┃ ┃ ┣━音量2 (160)
┃ ┃ ┃ ┣━音量3 (160)
┃ ┃ ┃ ┣━音量4 (240)
┃ ┃ ┃ ┣━音量5 (240)
┃ ┃ ┃ ┣━音量6 (240)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┗━Side Tone—側喇叭音量（8）
┃ ┣━LoudSp Mode—擴音模式
┃ ┃ ┣━Speech
┃ ┃ ┃ ┣━音量0 (16)
┃ ┃ ┃ ┣━音量1 (32)
┃ ┃ ┃ ┣━音量2 (48)
┃ ┃ ┃ ┣━音量3 (64)
┃ ┃ ┃ ┣━音量4 (80)
┃ ┃ ┃ ┣━音量5 (112)
┃ ┃ ┃ ┣━音量6 (128)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Key Tone
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (48)
┃ ┃ ┃ ┣━音量2 (80)
┃ ┃ ┃ ┣━音量3 (112)
┃ ┃ ┃ ┣━音量4 (144)
┃ ┃ ┃ ┣━音量5 (160)
┃ ┃ ┃ ┣━音量6 (176)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Melody
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (48)
┃ ┃ ┃ ┣━音量2 (80)
┃ ┃ ┃ ┣━音量3 (112)
┃ ┃ ┃ ┣━音量4 (144)
┃ ┃ ┃ ┣━音量5 (160)
┃ ┃ ┃ ┣━音量6 (176)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━FM Radio
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (80)
┃ ┃ ┃ ┣━音量2 (120)
┃ ┃ ┃ ┣━音量3 (140)
┃ ┃ ┃ ┣━音量4 (160)
┃ ┃ ┃ ┣━音量5 (184)
┃ ┃ ┃ ┣━音量6 (200)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Microphone
┃ ┃ ┃ ┣━音量0 (160)
┃ ┃ ┃ ┣━音量1 (160)
┃ ┃ ┃ ┣━音量2 (160)
┃ ┃ ┃ ┣━音量3 (160)
┃ ┃ ┃ ┣━音量4 (240)
┃ ┃ ┃ ┣━音量5 (240)
┃ ┃ ┃ ┣━音量6 (240)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┗━Side Tone (0)
┃ ┣━Headset Mode—耳機模式
┃ ┃ ┣━Speech
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (16)
┃ ┃ ┃ ┣━音量2 (48)
┃ ┃ ┃ ┣━音量3 (80)
┃ ┃ ┃ ┣━音量4 (96)
┃ ┃ ┃ ┣━音量5 (112)
┃ ┃ ┃ ┣━音量6 (128)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Key Tone
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (15)
┃ ┃ ┃ ┣━音量2 (31)
┃ ┃ ┃ ┣━音量3 (51)
┃ ┃ ┃ ┣━音量4 (67)
┃ ┃ ┃ ┣━音量5 (83)
┃ ┃ ┃ ┣━音量6 (99)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Melody
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (48)
┃ ┃ ┃ ┣━音量2 (96)
┃ ┃ ┃ ┣━音量3 (112)
┃ ┃ ┃ ┣━音量4 (144)
┃ ┃ ┃ ┣━音量5 (176)
┃ ┃ ┃ ┣━音量6 (255)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━FM Radio
┃ ┃ ┃ ┣━音量0 (0)
┃ ┃ ┃ ┣━音量1 (80)
┃ ┃ ┃ ┣━音量2 (120)
┃ ┃ ┃ ┣━音量3 (140)
┃ ┃ ┃ ┣━音量4 (160)
┃ ┃ ┃ ┣━音量5 (184)
┃ ┃ ┃ ┣━音量6 (200)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┣━Microphone
┃ ┃ ┃ ┣━音量0 (176)
┃ ┃ ┃ ┣━音量1 (176)
┃ ┃ ┃ ┣━音量2 (176)
┃ ┃ ┃ ┣━音量3 (176)
┃ ┃ ┃ ┣━音量4 (240)
┃ ┃ ┃ ┣━音量5 (240)
┃ ┃ ┃ ┣━音量6 (240)
┃ ┃ ┃ ┗━16 Level Setting
┃ ┃ ┃ ┣━Max Analog Gain(242)
┃ ┃ ┃ ┗━Step(0)
┃ ┃ ┗━Side Tone (0)
┃ ┣━鈴聲 (IMY 0-9; MIDI 0-9;SOUND 0-9)
┃ ┣━語音增強
┃ ┃ ┣━通用參數(參數 0-11)
┃ ┃ ┣━正常(參數 0-7)
┃ ┃ ┣━Headset Mode(參數 0-7)
┃ ┃ ┣━LoudSp Mode(參數 0-7)
┃ ┃ ┣━藍牙耳機模式(參數 0-7)
┃ ┃ ┣━藍牙無線模式(參數 0-7)
┃ ┃ ┣━輔助模式1(參數 0-7)
┃ ┃ ┣━輔助模式2(參數 0-7)
┃ ┃ ┗━輔助模式3(參數 0-7)
┃ ┣━Max Swing: 12800
┃ ┣━TV OUT
┃ ┃ ┣━音量0 (4)
┃ ┃ ┣━音量1 (61)
┃ ┃ ┣━音量2 (94)
┃ ┃ ┣━音量3 (127)
┃ ┃ ┣━音量4 (164)
┃ ┃ ┣━音量5 (180)
┃ ┃ ┣━音量6 (196)
┃ ┃ ┗━16 Level Setting
┃ ┃ ┣━Max Analog Gain(0)
┃ ┃ ┗━Step(0)
┃ ┣━Debug Info(參數 0-7)
┃ ┗━Auto Record Setting
┃ ┣━VM Support
┃ ┗━Auto Speech Record
┣━Gprs Act
┃ ┣━Attach—聯接
┃ ┣━1st PDP
┃ ┃ ┣━Activate PDP
┃ ┃ ┃ ┣━PDP Context 1
┃ ┃ ┃ ┣━PDP Context 2
┃ ┃ ┃ ┣━PDP Context 3
┃ ┃ ┃ ┣━PDP Context 4
┃ ┃ ┃ ┣━PDP Context 5
┃ ┃ ┃ ┣━PDP Context 6
┃ ┃ ┃ ┣━PDP Context 7
┃ ┃ ┃ ┣━PDP Context 8
┃ ┃ ┃ ┣━PDP Context 9
┃ ┃ ┃ ┣━PDP Context 10
┃ ┃ ┃ ┣━PDP Context 11
┃ ┃ ┃ ┣━PDP Context 12
┃ ┃ ┃ ┣━PDP Context 13
┃ ┃ ┃ ┣━PDP Context 14
┃ ┃ ┃ ┣━PDP Context 15
┃ ┃ ┃ ┣━PDP Context 30
┃ ┃ ┃ ┗━PDP Context 31
┃ ┃ ┣━Deactivate PDP
┃ ┃ ┗━Send Data
┃ ┃ ┣━Send Norm Data
┃ ┃ ┗━Send RLC Data
┃ ┗━2st PDP
┃ ┣━Activate PDP
┃ ┃ ┣━PDP Context 1
┃ ┃ ┣━PDP Context 2
┃ ┃ ┣━PDP Context 3
┃ ┃ ┣━PDP Context 4
┃ ┃ ┣━PDP Context 5
┃ ┃ ┣━PDP Context 6
┃ ┃ ┣━PDP Context 7
┃ ┃ ┣━PDP Context 8
┃ ┃ ┣━PDP Context 9
┃ ┃ ┣━PDP Context 10
┃ ┃ ┣━PDP Context 11
┃ ┃ ┣━PDP Context 12
┃ ┃ ┣━PDP Context 13
┃ ┃ ┣━PDP Context 14
┃ ┃ ┣━PDP Context 15
┃ ┃ ┣━PDP Context 30
┃ ┃ ┗━PDP Context 31
┃ ┣━Deactivate PDP
┃ ┗━Send Data
┃ ┣━Send Norm Data
┃ ┗━Send RLC Data
┣━Misc.—雜類(miscellaneous)
┃ ┣━Auto Answer[關閉]—自動回應
┃ ┣━High Speed SIM[關閉]—高速SIM
┃ ┣━PWR Duration—電源持續時間
┃ ┃ ┣━PWR Time
┃ ┃ ┣━Current Time—當前時間
┃ ┃ ┣━Duration—持續時間
┃ ┃ ┗━Last Duration—上次持續時間
┃ ┣━Backlight Mode[關閉]—背景燈
┃ ┣━序列阜偵測模式
┃ ┃ ┣━UART 1[關閉]
┃ ┃ ┣━UART 2[關閉]
┃ ┃ ┗━UART 3[關閉]
┃ ┣━Assert Testing(don’t submit as a bug)—斷言測試(不作爲
缺陷提交)一
┃ ┣━RAM Test—RAM測試
┃ ┣━Memoey Dump[關閉]—記憶體垃圾
┃ ┣━MMI Debug[關閉]—人機界面(Man-Machine Interface)調試
┃ ┣━AMR[開啓]
┃ ┣━WAP—無線應用協定(Wireless Application Protocol)
┃ ┃ ┣━WAP Assert for Debug[關閉]
┃ ┃ ┣━User Agent—用戶代理
┃ ┃ ┃ ┣━MAUI E800(.)
┃ ┃ ┃ ┣━SONY P800
┃ ┃ ┃ ┣━NOKIA 7250i
┃ ┃ ┃ ┣━SHARP GX21
┃ ┃ ┃ ┣━SONY T610
┃ ┃ ┃ ┣━SAMSUNG
┃ ┃ ┃ ┣━NOKIA 6230
┃ ┃ ┃ ┣━MOTO V303
┃ ┃ ┃ ┣━SE W800i
┃ ┃ ┃ ┗━SE Z800
┃ ┃ ┣━Accept Header—接受的資料頭
┃ ┃ ┃ ┣━WAP 1.2.1
┃ ┃ ┃ ┣━WAP 2.0(.)
┃ ┃ ┃ ┣━WML—無線標記語言(Wireless Markup Language）
┃ ┃ ┃ ┣━XHTML—擴展超文本標記語言(eXtend Hypertext
Markup Language)
┃ ┃ ┃ ┗━HTML—超文本標記語言(Hypertext Markup Language)
┃ ┃ ┣━MMS Version—彩信(Multimedia Message Service)版本
┃ ┃ ┃ ┣━MMS Default
┃ ┃ ┃ ┣━MMS 1.0(.)
┃ ┃ ┃ ┣━MMS 1.1
┃ ┃ ┃ ┗━MMS 1.2
┃ ┃ ┗━Offline Page[關閉]—脫機頁面
┃ ┣━J2ME TCK—J2ME(Java 2 Micro Edition) TCK(Technology
Compatibility Kit)
┃ ┃ ┣━Normal(.)
┃ ┃ ┣━CLDC TCK
┃ ┃ ┣━MIDP TCK
┃ ┃ ┣━WMAPI TCK
┃ ┃ ┗━MMAPI TCK
┃ ┣━Video High Bitrate[關閉]—視頻的高比特率
┃ ┗━Cell Reselection
┃ ┣━Resume(.)
┃ ┣━Suspend(Trans. State)
┃ ┗━Suspend(All State)
┣━Auto Test List—自動測試列表
┃ ┣━Version—版本
┃ ┃ ┣━Add from List—從列表添加
┃ ┃ ┣━Change Priority—改變優先權
┃ ┃ ┗━Remove—移除
┃ ┣━Backlight—背景燈
┃ ┣━LCD—液晶顯示幕
┃ ┣━KeyPad—鍵盤
┃ ┣━MIC—麥克風
┃ ┣━Melody—鈴聲
┃ ┣━Vibrator—馬達
┃ ┗━CAMERA—攝像頭
┣━PWR Down Control—電源下降控制
┃ ┣━PDN_con0: 1278
┃ ┣━PDN_con1: 65175
┃ ┣━PDN_con2: 63470
┃ ┗━PDN_con3: 65535
┣━SW PATCH SELTECT—軟體補丁選擇
┃ ┗━DSP Patch: 0
┣━Debug Info—調試資訊
┃ ┣━Last Exception—上次異常
┃ ┗━System Stats
┣━Socket Test—套接字測試
┃ ┣━DNS Query
┃ ┣━HTTP Get
┃ ┣━ECHO
┃ ┣━Date Query
┃ ┣━TraceRt
┃ ┗━Iperf
┣━Bluetooth—藍牙
┃ ┣━Start Testing
┃ ┣━Add Audio Conn
┃ ┣━Remove Audio Conn
┃ ┣━Far End Lookback
┃ ┗━Exit Test Mode
┣━Profiling
┃ ┗━Multimedia
┗━RF Test Tool
【三重紅螞蟻】☆°長江°☆ 詳表中的這些參數是可以修改的，以使得手機完成與出廠時不同的功能。但是，我還是建議大家不要亂改！畢竟這不是開放給普通用戶的。如果自己要修改，最好在修改之前，把它的原始值記錄下來，以便能再次修改回來。
文章定位：
